Capacity: 2,000 tph Casing Distance: 150 feet Two-Stage Blower Design Operating Conditions: -40F to 110F Compatible Loader Size: 1-2 Cubic Yard

Blowerhead Working Height: 45” Spot Chute Working Height: NA Total Weight 13,500 lbs. Cutting Width: 118” Scraper Blade Width: 108″ Total Height 73″ Total Length: 113″

Bolted and Welded Construction Steel Rated for Maximum Usage Fusion Coupler to Match Loader: ACS Pro Series 2000 Frame Designed to Withstand Loads Induced by the Loader Split Frame for Maintenance

One-Year Limited Warranty Warranty Literature to be Included w/ Operator’s Manual

Diesel Engine Turbo Charged Yanmar 4TN107FTT HP Rating: 208 HP @ 2200 RPM Torque Rating: 627 Lb-Ft Heavy-Duty Alternator Two Stage Dry-Type Air Cleaner w/ Pre-Cleaner Air Restriction Vacuum Gauge Heavy Duty Cooling System Electronic Controlled Injection System Low Oil and High Coolant Temp Shutdown System In-Line Heated Fuel/Water Separator w/ Replaceable Element Fuel and Oil Filters Fuel, Oil and Coolant Reservoirs Include Remote Drains and Easy Access Fills

Heavy Duty Cooling System Permanent Type Antifreeze Rated -40F to 110F Radiator and Charge Air Cooler System w/ Galvanized Mesh Radiator Clamps Constant Torque Design

Stationary Truck Loading Chute 2-Section Chute Deflector 270-Degrees Rotation Remote Grease Point for Chute LED Lights on Chute Chain-less Rotation

Tilting Engine Enclosure for Full Access to Compartment Protective Screen Over Radiator Completely Water Sealed Side Vents Actuator to Hold Compartment Open Gas Strut Assist When Opening

50 Gallon Under-Body Fuel Drain Under-Body Protective Guard Fuel Tank Includes Louvers Fuel System Includes Primary Fuel Filter and Secondary Fuel/Water Separator Fuel Tank Breather

Heavy-Duty Hydraulic Valving w/ Insulated Wiring Connections All Functions Controlled Through One Valve Manifold Auxiliary Gear Pump for Functions Valving controlled On-Demand 11-Micron Return Filter 10-Gallon Hydraulic Tank w/ Breather, Sight Glass, Remote Drain w/ Ball Valve, Suction Strainer, Chained Cap, & Filler Neck Strainer

12VDC STFused Fully Wireless System Handheld Remote for All Functions 7” LCD Screen In-Cab 25’ Backup Hardwire Wiring Color-Coded Wiring Sealed & All Connections Water Proof Screen Includes Digital Readouts for Tachometer, Hour Meter, Volt Meter, Engine Coolant, Oil Pressure, Fuel Level, and DEF Level Audible and Visual Alarms for All Engine and Sawtooth Faults Full Diagnostic/Code Center for Engine and Sawtooth Faults w/ Auto Resetting Feature When Code Is Cleared Master Emergency Shut Down Master Electrical Disconnect Automatic Clutch Protection Two 1000 CCA Maintenance-Free Batteries Lighting Package: LEDs Mounted on Blower Head, Engine Compartment, Spot Chute, and Master Shear ASsembly Cold Weather Aid Package: Engine Block Heater, Heated Fuel Water Separator.

Two-Stage Design First Stage: Ribbon, 36” Diameter, 3/8″, Two-Piece, Serrated, Bolted to Heavy-Duty Reels Second Stage: Impeller, 36” Diameter, 12” Depth, 1/4” Casing, 5 Blades of Abrasion-Resistant Steel, Blades Individually Replaceable, Full Fan Opening Discharge: Flat Cast Right w/ 135- Degree Full Rotation Rubber Deflector Bolted to Top of Blower Head Frame Housing Rotation by Hydraulic Cylinder

Replaceable Abrasion Resistant Scraper Blade, Full Width, Two Piece Adjustable Replaceable Swivel Skid Shoes

All Surfaces Prepped Before Paint Primer: Two Coats of Two-Part Epoxy Primer Top Coat: Two-Part Polyurethane Paint Paint: Custom Paint Options to Match Customer Preference Optional Powder Coat

Complete Set of Operators Manuals, Maintenance Manuals, and Parts Manuals Manuals Include Electrical, Hydraulic Schematics & Lubrication Charts. Training: 1 Day Operational and Mechanical Training

L36 - Sawtooth Industrial

DIMENSIONS

Blowerhead Working Height: 45”
Spot Chute Working Height: NA
Total Weight 13,500 lbs.
Cutting Width: 118”
Scraper Blade Width: 108″
Total Height 73″
Total Length: 113″

FRAME

Bolted and Welded Construction
Steel Rated for Maximum Usage
Fusion Coupler to Match Loader: ACS Pro Series 2000
Frame Designed to Withstand Loads Induced by the Loader
Split Frame for Maintenance

WARRANTY

One-Year Limited Warranty
Warranty Literature to be Included w/ Operator’s Manual

ENGINE

Diesel Engine Turbo Charged
Yanmar 4TN107FTT
HP Rating: 208 HP @ 2200 RPM
Torque Rating: 627 Lb-Ft
Heavy-Duty Alternator
Two Stage Dry-Type Air Cleaner w/ Pre-Cleaner
Air Restriction Vacuum Gauge
Heavy Duty Cooling System
Electronic Controlled Injection System
Low Oil and High Coolant Temp Shutdown System
In-Line Heated Fuel/Water Separator w/ Replaceable Element
Fuel and Oil Filters
Fuel, Oil and Coolant Reservoirs Include Remote Drains and Easy Access Fills

COOLING SYSTEM

Heavy Duty Cooling System
Permanent Type Antifreeze Rated -40F to 110F
Radiator and Charge Air Cooler System w/ Galvanized Mesh
Radiator Clamps Constant Torque Design

SPOT CHUTE

Stationary Truck Loading Chute
2-Section Chute Deflector
270-Degrees Rotation
Remote Grease Point for Chute
LED Lights on Chute
Chain-less Rotation

ENGINE COMPARTMENT

Tilting Engine Enclosure for Full Access to Compartment
Protective Screen Over Radiator
Completely Water Sealed
Side Vents
Actuator to Hold Compartment Open
Gas Strut Assist When Opening

FUEL SYSTEM

50 Gallon
Under-Body Fuel Drain
Under-Body Protective Guard
Fuel Tank Includes Louvers
Fuel System Includes Primary Fuel Filter and Secondary Fuel/Water Separator
Fuel Tank Breather

HYDRAULIC SYSTEM

Heavy-Duty Hydraulic Valving w/ Insulated Wiring Connections
All Functions Controlled Through One Valve Manifold
Auxiliary Gear Pump for Functions
Valving controlled On-Demand
11-Micron Return Filter
10-Gallon Hydraulic Tank w/ Breather, Sight Glass, Remote Drain w/ Ball Valve, Suction Strainer, Chained Cap, & Filler Neck Strainer

ELECTRICAL SYSTEM

12VDC
STFused Fully Wireless System
Handheld Remote for All Functions
7” LCD Screen In-Cab
25’ Backup Hardwire
Wiring Color-Coded
Wiring Sealed & All Connections Water Proof
Screen Includes Digital Readouts for Tachometer, Hour Meter, Volt Meter, Engine Coolant, Oil Pressure, Fuel Level, and DEF Level
Audible and Visual Alarms for All Engine and Sawtooth Faults
Full Diagnostic/Code Center for Engine and Sawtooth Faults w/ Auto Resetting Feature When Code Is Cleared
Master Emergency Shut Down
Master Electrical Disconnect
Automatic Clutch Protection
Two 1000 CCA Maintenance-Free Batteries
Lighting Package: LEDs Mounted on Blower Head, Engine Compartment, Spot Chute, and Master Shear ASsembly
Cold Weather Aid Package: Engine Block Heater, Heated Fuel Water Separator.

POWERTRAIN DRIVE SYSTEM

Hydrostatic Drive Train
Heavy-Duty Rugged Hydrostatic Pumps and Motors for both Fan and Reel Drive – NO Shear Pins!
Heavy-Duty Deaeration Hydraulic Tank
Independent Charge Pressure Systems
Infinitely Variable Control for Precise Operation
Quick Couplers for Maintenance

BLOWER HEAD

Two-Stage Design
First Stage: Ribbon, 36” Diameter, 3/8″, Two-Piece, Serrated, Bolted to Heavy-Duty Reels
Second Stage: Impeller, 36” Diameter, 12” Depth, 1/4” Casing, 5 Blades of Abrasion-Resistant Steel, Blades Individually Replaceable, Full Fan Opening
Discharge: Flat Cast Right w/ 135- Degree Full Rotation
Rubber Deflector Bolted to Top of Blower Head Frame
Housing Rotation by Hydraulic Cylinder

BLADES/SHOES

Replaceable Abrasion Resistant Scraper Blade, Full Width, Two Piece
Adjustable Replaceable Swivel Skid Shoes

PAINT

All Surfaces Prepped Before Paint
Primer: Two Coats of Two-Part Epoxy Primer
Top Coat: Two-Part Polyurethane Paint
Paint: Custom Paint Options to Match Customer Preference
Optional Powder Coat

DOCUMENTATION

Complete Set of Operators Manuals, Maintenance Manuals, and Parts Manuals
Manuals Include Electrical, Hydraulic Schematics & Lubrication Charts.
Training: 1 Day Operational and Mechanical Training

L36

SELF CONTAINED SNOW BLOWER

Warranty